Bamboo Flooring in Burton WA 98013

(Burton WA 98013) �” 

What is the best way to install a bamboo floor? You could install the floor as direct stick, floating, plank on ply, using an AcouBond system, or using joists/battens to name a few. Each method of installing a premium bamboo floor has both its positives and negatives but when weighed up you are able to determine the more suitable method of installation.

DIRECT STICK

Our preferred and the most commonly accepted method of installing a bamboo floor Bamboo Flooring Problems - What Are the Common Problems ... Burton WA 98013 in WA is direct stick. This is where our boards are glued directly to the sub floor resulting in a very quiet floor to walk on. Glue is trowelled onto the floor and the boards are laid directly on top. It is a strong and permanent method of installation. We use a rubbery drying adhesive called Sikabond T55. Using alternative glue for this method of installation which is not elastic bonding will usually result in Burton WA 98013 stress put on the boards causing cupping and the widening of gaps in between boards. A direct stick bamboo floor is strong and stable, stopping the boards from moving too easily and can be walked on the same day it is installed. However this floor will be difficult, but not impossible to remove if needed, and does require a reasonably level sub floor.

FLOATING FLOOR

Installing a bamboo floor as a floating floor involves using a thin Bamboo Flooring - Is It Better Than Cork Flooring? Burton WA 98013 high density oam underlay. The boards are not glued or fixed to the sub floor rather they are glued along the tongue and groove on all sides. The floor literally floats. This type of installation is commonly used for cheaper laminates in Perth having an inferior quality image. Floating a bamboo floor is the most common method for DIY customers as it is a cheaper and easier method of installing a bamboo floor than direct Burton WA 98013 stick. It is regarded as softer to walk on, but is regarded as structurally inferior and noisy to walk on. A floating bamboo floor is easily damaged by excess water spills and can’t be lived on for a day or two until the pva glue dries.

PLANK ON PLY

Plank on ply is commonly used for fixing timber floors and is regarded by the industry as superior. In terms of timber flooring, this is usually correct. Plank Burton WA 98013 on ply uses 12mm sheets of plywood that are glued and nailed onto the sub floor and the bamboo floor boards are glued and secret nailed onto the ply. The ply helps even out floor undulations and gives an easy surface for the installer to pin the timber down. It also helps protect the floor against moisture from the concrete slab. In terms of premium bamboo flooring we gain little to no benefit from installing Burton WA 98013 over plywood. The reason for this is premium bamboo flooring is not required to be pinned because it is dimensionally straight and square, it is also more moisture resistant. The glue and installation technology that we have available today enables us to even out small floor undulations. Ply can be useful in building up floor heights.

ACOUBOND

Acoubond type of installation was developed in Europe by Sika International to overcome the problem of impact noise transfer from Burton WA 98013 upper floors to lower living areas, such as high rise apartments. Australian building legislation now stipulates that solid floors in multi level dwellings must be installed with sound absorption systems. The bamboo boards are laid over a 5mm foam mat, which has slots cut out for the application of triangular beads of Sika T53. According to Gabriel’s Environmental Design Pty Ltd this has a reduction in impact noise by 16dB compared to a reduction of Burton WA 98013 7dB for direct stick. A bamboo floor installed with the Acoubond system is a little noisier to walk on and is not as strong as direct stick, but it does improve walking comfort and compensates for surface irregularities.

JOISTS/BATTENS

Installing on joists or battens is a traditional type of installation using timber or ply battens fixed to bearers or concrete. The bamboo floor boards are fixed using glue and nails to the Battens. This type of installation Burton WA 98013 was commonly used for timber floors but is not so popular with bamboo floors, yet it is a safe, stable and an easy way to bring bamboo boards up to existing floor types by using appropriately sized battens. Joists (battens) are usually 12mm thick and 40mm wide and made from plywood or a stable hardwood like Jarrah. This floor is commonly thought to be more absorbent of foot fall and therefore more comfortable to walk Burton WA 98013 on. It does however produce the sound of a traditional timber floor which is quite noisy.

While each method of installation has obvious benefits, overall we do prefer installing our premium bamboo floors as direct stick, specifically with Sika bond T55. It is by far the more suited method of installation for our product and ensures for a secure and quiet floor to walk on. It is a very convenient method of installation as you won’t Burton WA 98013 need to move out of home and can walk on your beautiful bamboo floor straight away.

Video: Evaluating Bamboo Flooring As A Source Material For Woodwork

Video: Making Bamboo boards Pt 1

Video: Aima Bamboo Flooring defects, Home Depot

Video: New bamboo floor in bathroom

Video: Making Bamboo boards Pt 1

Video: New bamboo floor in bathroom

Business Results 1 - 10 of 12

Seattle Flooring
4 Reviews
Flooring, Painters, Carpet Installation
Phone:
7310 S Hosmer St, Tacoma, WA 98048

iFLOOR
23 Reviews
Flooring
Phone:
131 Andover Park E, Tukwila, WA 98188

Contract Furnishings Mart
4 Reviews
Flooring, Carpeting, Cabinetry
Phone:
3600E Industry Dr E, Tacoma, WA 98424

iCork Floor
4 Reviews
Flooring
Phone:
1209 Central Ave S, Ste 137, Kent, WA 98032

Wood Brothers Flooring
6 Reviews
Flooring
Phone:
4765 Parkhurst Dr NE, Ste 203, Bremerton, WA 98310

Blair And Son Co Flooring
6 Reviews
Flooring
Phone:
6017 144th St E, Puyallup, WA 98375

Great Floors
16 Reviews
Flooring, Carpeting, Kitchen & Bath
Phone:
6818 Tacoma Mall Blvd, Tacoma, WA 98409

Quality Hardwood Floors
3 Reviews
Flooring, Refinishing Services
Phone:
9807 Lake Steilacoom Dr SW, Lakewood, WA 98498

Greater Seattle Floors
10 Reviews
Flooring
Phone:
114 S Findlay St, Seattle, WA 98108

Meyer Floors & Blinds
9 Reviews
Carpet Installation, Flooring, Shades & Blinds
Phone:
8400 S Tacoma Way, Tacoma, WA 98499

HOME PROS FLOORING

Looking for the right Flooring company for your home or property? Since 1980 we have been providing Flooring services to the Burton area.

(855) 398-1989

new-flooring

Why Should You Call Us?

Highly Rated

Integrity, quality workmanship and attention to detail have made us one of the most reliable Flooring companies in Burton.

100% Washington Licensed Experts

We can complete any size project  in a timely manner, without skipping any steps  or cutting any corners.

Affordable Prices

We work hard to keep our costs low and transfer these efficiency savings on to our customers

Location

Our Hours

Monday - Saturday: 8:00AM to 8:00PM
Sunday: 9:00AM to 6:00PM

GET A QUOTE NOW

For quality workmanship and service for your residential and commercial Flooring needs, choose a company with over 38 years of service in the Burton area.

new-floors

Our Happy Burton Clients

GEORGE D. -

"Home PROS Flooring was a pleasure to work with! They were very prompt in responding with a quote, extremely knowledgeable, and their pricing is very good. I highly recommend them.

GEORGE D. - Burton

JOHN P. -

"Home PROS Flooring put in some tile for us and everything went off without a hitch. They arrived when they said they would and did the job exactly as they had explained it. The product they sold us was excellent, as was the installation process and the folks who did the install."

JOHN P. - Burton

Do you have emegency?

Please don't hesitate to call us if you have an emergency. We are committed towards providing best Flooring services and are available 24/7. 

Contact Us

Address: , 
Phone: (855) 398-1989

(855) 398-1989